Stress Strain Relationship

What is the reason of low toughness of grey cast iron

 Which factor decreases toughness of material

The property of a material which enables it to absorb energy and deform plastically without fracture is

Which metal has maximum malleability.

 The ability of a material to undergo plastic deformation without rupture, when a compressive force is applied, is known as 

A typical stress-strain curve for a wire of a metal wire is shown below:

If the point D and E are very close, the material is:

Permanent set in a material is produced by subjecting it to

Permanent set refers to:

In a technical sense a substance with a _____ elasticity is one that requires a large force to produce a distortion-for example, a steel sphere. 
 

Out of the following whose elasticity is independent of temperature;

If you try to displace any ball from its equilibrium position, the spring system tries to restore the ball back to its original position.

The temperature of a wire is $2$ times . The Young’s modulus of elasticity.

Diamond is a very good example of

Define toughness of a material.

Discuss Elasticity and Plasticity in solids with example.

Two blocks of masses $1 \mathrm{kg}$ and $2 \mathrm{kg}$ are connected by a metal wire going over a smooth pulley as shown in the figure. The breaking stress of the metal is $2\times {10}^9 \mathrm{N} {\mathrm{m}}^{-2}$. If the minimum radius of the wire used is $\frac{r}{10}\times {10}^{-5} \mathrm{m}$ so that it is not to break, find the value of $r$. Take, $g=10 \mathrm{m} {\mathrm{s}}^{-2}$.

Now, match the terms in Column I with corresponding terms in Column II.

A steel cable with a radius of $1.5 \mathrm{cm}$ supports a chairlift at a ski area. If the maximum stress is not to exceed ${10}^8\hspace{0.17em}\mathrm{N}\hspace{0.17em}{\mathrm{m}}^{-2},$ what is the maximum load the cable can support?

Determine the region where Hooke’s law is obeyed, the ultimate strength point and fracture point in the given stress-strain graph.

Which of the following substance develops high strain when stretched ?